RL V6-3.7L (2009)
Fuel Filler Hose: Service and Repair
Fuel Fill Pipe Removal/Installation
1. Drain the fuel tank. See: Service and Repair
2. Remove the left rear damper. See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Removal and
Replacement/Rear Suspension
3. Remove the fuel fill cap.
4. Disconnect the fuel fill tubes (A), from the fuel fill pipe (B).
5. Remove the bolts and the fuel fill pipe.
6. Install the parts in the reverse order of removal.
NOTE: Before connecting the fuel fill pipe and quick-connect fitting, check for dirt, and clean it if needed, taking care not to damage the fuel fill
pipe and other parts.