RL V6-3.7L (2009)
Electronic Throttle Control Module: Service and Repair
Throttle Actuator Control Module Replacement
1. Remove the right kick panel. See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Interior Trim Removal/Installation -
Front Door Sill Area
2. Remove the glove box. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
3. Remove the HandsFreeLink control unit See: Relays and Modules - Accessories and Optional Equipment/Communications Control
Module/Service and Repair and the adaptive cruise control (ACC) unit and its bracket (if equipped). See: Relays and Modules - Cruise
Control/Cruise Control Module/Service and Repair
4. Disconnect the throttle actuator control module 16P connector (A).
5. Remove the nuts (B) and the throttle actuator control module (C).
6. Install the parts in the reverse order of removal.
With Adaptive Cruise Control (ACC) System
Without Adaptive Cruise Control (ACC) System