RL V6-3.7L (2009)
Repairs and Inspections Required After a Collision: Service and Repair
Component Replacement/Inspection After SRS Deployment
NOTE:
-
Before doing any SRS repairs, use the HDS SRS menu method to check for DTCs; refer to the DTC Troubleshooting Index for the less obvious
deployed parts (seat belt tensioners, front impact sensors, side airbag sensors, etc.).
-
After a vehicle collision, do the ODS unit operation check. See: Air Bag Systems/Testing and Inspection/Component Tests and General
Diagnostics/ODS Unit Operation Check
After a collision where the seat belt tensioners deployed, replace these items:
-
SRS unit
-
Seat belt tensioners
-
Front impact sensors
After a collision where the front airbag(s) deployed, replace these items:
-
SRS unit
-
Deployed airbag(s)
-
Seat belt tensioners
-
Front impact sensors
After a collision where the side airbag(s) deployed, replace these items:
-
SRS unit
-
Deployed side airbag(s)
-
Reinforcing cloth rear hooks
-
Side impact sensor(s) (first) for the side(s) that deployed
-
Side impact sensor(s) (second) for the side(s) that deployed
-
B-pillar lower trim
After a collision, where a side curtain airbag has deployed, replace the items for the side(s) that deployed:
-
SRS unit
-
Deployed side curtain airbag(s)
-
Seat belt tensioner(s) for the side(s) that deployed
-
Side impact sensor(s) (first) for the side(s) that deployed
-
Side impact sensor(s) (second) for the side(s) that deployed
-
Rear safing sensor
-
Roof trim
-
A-pillar trim
-
B-pillar trim
-
C-pillar trim
