RL V6-3.7L (2009)
Fuel Door Switch: Service and Repair
Fuel Fill Door Opener Switch Test/Replacement
1. Remove the driver's door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Panel Removal/Installation
2. Disconnect the 10P connector (A) from the fuel fill door opener switch (B).
3. Check for continuity between terminals No. 8 and No. 10.
-
With the switch pushed, there should be continuity.
-
With the switch released, there should be no continuity.
4. If the continuity is not as specified, remove the two screws and replace the switch.