RL V6-3.7L (2009)
Sunroof / Moonroof Switch: Service and Repair
Moonroof Switch Test/Replacement
1. Remove the roof console. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Roof Console
Replacement
2. Remove the HomeLink unit from the top of the roof console.
3. Remove the four screws from the roof console (A), and remove the rear cover (B).
4. Disconnect the 7P connector (C) from the moonroof switch (D), then remove the two screws and switch.
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, replace the illumination bulb or the switch.
7. If the switch is OK, but there is a malfunction related to the moonroof switch operation, replace the roof console. See: Body and Frame/Interior
Moulding / Trim/Console/Service and Repair/Removal and Replacement/Roof Console Replacement
8. Install the parts in the reverse order of removal.