RL V6-3.7L (2009)
Headlamp Alignment Switch: Service and Repair
AFS OFF Switch Test/Replacement
1. Remove the instrument fascia. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Fascia Removal/Installation
2. Disconnect the 6P connector (A) from the AFS OFF switch (B).
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, remove the screws and replace the switch.
5. After replacement, do the adaptive front lighting control unit learning procedure. See: Lighting and Horns/Headlamp/Testing and
Inspection/Programming and Relearning/Adaptive Front Lighting Control Unit Learning Procedure - When a Brand New Front Lighting Control
Unit is Installed
