RL V6-3.7L (2009)
Telescoping Wheel Switch: Service and Repair
Power Tilt/Telescopic Steering Switch Test/Replacement
1. Remove the driver's dashboard undercover, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation and the driver's dashboard lower cover, See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Driver's Dashboard Lower Cover Removal/Installation then remove the steering column
covers. See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Removal and Installation
2. Disconnect the 13P connector (A) from the power tilt/telescopic steering switch (B).
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, replace the switch.