RL V6-3.7L (2009)
Power Window Switch: Service and Repair
Power Window Master Switch Replacement
Power Window Master Switch Replacement
1. Remove the driver's door armrest. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Panel Removal/Installation
2. Disconnect the 6P connector (A) from the power window master switch (B).
3. Remove the four screws and the switch.
4. Install the switch in the reverse order of removal.
5. After replacement, reset the power window control unit. See: Windows and Glass/Windows/Testing and Inspection/Programming and Relearning
