RL V6-3.7L (2009)
Wiper Switch: Service and Repair
Wiper/Washer Switch Replacement
NOTE: The wiper/washer switch is built into the combination switch control unit. For the wiper/washer test, refer to the combination switch control unit
input test. See: Wiper and Washer Systems/Testing and Inspection/Wiper/Washer Switch (Combination Switch Control Unit) Input Test
1. Remove the driver's dashboard undercover, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation and the driver's dashboard lower cover. See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Driver's Dashboard Lower Cover Removal/Installation
2. Remove the steering column covers. See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Removal and
Installation
3. Disconnect the combination light switch 12P connector, and dashboard wire harness 8P connector (A) from the wiper/washer switch (B).
4. Remove the two screws, then slide out the wiper/washer switch.
5. Install the parts in the reverse order of removal.
