RL V6-3.7L (2009)
3. Remove the brake hose mounting bracket (A).
4. Remove the brake caliper bracket mounting bolts (B), and remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose with force.
5. Remove the wheel speed sensor (A) and the O-ring (B) from the knuckle. Do not disconnect the wheel sensor connector.
6. Raise the stake (A), then remove the spindle nut (B).
7. Remove the brake disc. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Front Brake Disc
Replacement
8. Remove the hub bearing unit mounting bolts (A).
