RL V6-3.7L (2009)
Suspension Spring ( Coil / Leaf ): Overhaul
Front Damper/Spring Disassembly, Inspection, and Reassembly
Exploded View
Disassembly/Inspection
NOTE: When compressing the damper spring, use a commercially available strut spring compressor (Branick MST-580A or Model 7200, or equivalent).
According to the manufacturer's instructions.
1. Compress the damper spring, then remove the self-locking nut (A) while holding the damper shaft with a hex wrench (B). Do not compress the
spring more than necessary to remove the nut.
2. Release the pressure from the strut spring compressor, then disassemble the damper as shown in the Exploded View.
3. Reassemble all the parts, except for the spring mounting cushion and spring.