RL V6-3.7L (2009)
Tire Pressure Module: Service and Repair
TPMS Control Unit Replacement
NOTE: Make sure the TPMS control unit mounting base is not bent or twisted as this may affect communication with the indicators and the tire pressure
sensors.
1. Make sure the ignition switch is in LOCK (0).
2. Remove the rear shelf. See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
3. Disconnect the TPMS control unit connectors (A).
4. Remove the TPMS control unit (B).
5. Install the TPMS control in the reverse order of removal.
6. Connect the HDS, and memorize the pressure sensor IDs. See: Tire Pressure Sensor/Testing and Inspection Do not memorize the IDs
automatically.