RL V6-3.7L (2009)
Shift Interlock Solenoid: Testing and Inspection
A/T Shift Lock Solenoid Test
1. Connect the HDS to the DLC (A).
2. Select Shift Lock Solenoid Test in the Miscellaneous Test Menu, and check that the shift lock solenoid operates with the HDS.
NOTE: If the HDS does not communicate with the PCM, troubleshoot the DLC circuit. See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Component Tests and General Diagnostics/DLC Circuit Troubleshooting
3. Check that the shift lever can be moved out of P when Shift Lock Solenoid: ON. Move the shift lever back in P, and make sure it locks with Shift
Lock Solenoid: OFF.
4. Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released.
5. If the shift lock solenoid works improperly, troubleshoot shift lock system circuit. See: Transmission Control Systems/Testing and
Inspection/Component Tests and General Diagnostics/Interlock System - Shift Lock System Circuit Troubleshooting
