RL V6-3.7L (2009)
10. Remove the air cleaner. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair
11. Remove the nuts securing the shift cable bracket (A).
12. Remove the spring clip/washer (B) and control pin (C), then separate the shift cable end (D) from the control lever (E).
13. Remove the shift cable bracket from the steering gearbox stiffener.
14. Remove the heat shield under the shift cable grommet.
15. Remove the shift cable grommet, and pull out the shift cable.
16. Insert the new shift cable through the grommet hole, and install the grommet in its hole. Do not bend the shift cable excessively.