RL V6-3.7L (2009)
10. Disconnect the A/T clutch pressure control solenoid valve A connector (A), A/T clutch pressure control solenoid valve B connector (B), 4th clutch
transmission fluid pressure switch connector (C), shift solenoid harness connector (D), and input shaft (mainshaft) speed sensor connector (E).
11. Remove the bolt securing the harness cover (F), and remove the harness cover from its bracket (G).
12. Remove the A/T clutch pressure control solenoid valves A and B, ATF pipes (C), and gasket (D).
13. Replace the gasket and O-rings (E) with new ones when installing the A/T clutch pressure control solenoid valves A and B.
14. Remove the solenoid valve cover (A), dowel pins (B), and gasket (C).
15. Replace the gasket with a new one when installing the solenoid valve cover.
