RL V6-3.7L (2009)
Shift Solenoid: Service and Repair
Shift Solenoid Valve Removal and Installation
Shift Solenoid Valve Removal and Installation
NOTE: Do not hold the solenoid valve connector to remove and install the shift solenoid valve. Be sure to hold the solenoid valve body.
1. Remove the mounting bolts, then remove the solenoid valves by holding the solenoid valve body.
2. Install the new O-rings (E) on each shift solenoid valve.
NOTE: If you are installing a new shift solenoid valve, it comes with new O-rings already installed.
3. Install shift solenoid valve D (black connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator
body.
4. Install shift solenoid valve A (black connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator
body.
5. Install shift solenoid valve C (brown connector) by holding the shift solenoid valve body; be sure to position the mounting bracket on top of the
bracket of shift solenoid valve A.
NOTE: Do not install shift solenoid valve C before installing shift solenoid valve A. If shift solenoid valve C is installed before installing shift
solenoid valve A, it may damage the hydraulic control system.
6. Install shift solenoid valve B (brown connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator
body.
