RL V6-3.7L (2009)
Shifter A/T: Removal and Replacement
Paddle Shifter + (Upshift Switch) Replacement
Paddle Shifter + (Upshift Switch) Replacement
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair in
the SRS before doing repair or service.
1. Remove the steering wheel. See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel
Removal
2. Remove the steering wheel rear cover (A).
3. Remove the paddle shifter + (upshift switch) connector from its holder, and disconnect the connector.
4. Remove the screw (B) securing the paddle shifter + (C), then remove and replace the paddle shifter +.
5. Install the new paddle shifter + with the screw, connect the connector, and install the connector in the holder.
6. Install the steering wheel rear cover.
7. Install the steering wheel. See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel
Installation
