RL V6-3.7L (2009)
Valve Body: Service and Repair
Valve Body Valve Installation
Valve Body Valve Installation
1. Coat all parts with ATF before assembly.
2. Install the valves and springs in the sequence shown for the main valve body, See: Service and Repair/Overhaul/Valve Body/Main Valve Body
Disassembly, Inspection, and Reassembly secondary valve body, See: Service and Repair/Overhaul/Valve Body/Secondary Valve Body
Disassembly, Inspection, and Reassembly regulator valve body, See: Service and Repair/Overhaul/Valve Body/Regulator Valve Body
Disassembly, Inspection, and Reassembly and accumulator body. See: Service and Repair/Overhaul/Valve Body/Accumulator Body Disassembly,
Inspection, and Reassembly Refer to the following valve cap illustrations, and install each valve cap so the end shown facing up will be facing the
outside of the valve body, then secure the valve cap with the valve cap clip.
3. Install the valve (A) and valve spring (B) in the valve body. Push the valve spring in with a screwdriver, then install the spring seat (C).
