RL V6-3.7L (2009)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Removal
Propeller Shaft Removal
NOTE: Do not drop or damage the propeller shaft during removal.
1. Raise the vehicle on a lift.
2. Remove the muffler (A) and the exhaust pipe B.
3. Remove the No. 1 propeller shaft protector.
4. Make a reference mark (A) across the propeller shaft (B) and the transfer companion flange (C).
NOTE: Wrap the length of each propeller shaft with cardboard, at least 5 mm thick, before removing the propeller shaft.
5. Remove the nuts (D).
6. Make a reference mark (A) across the propeller shaft (B) and the rear differential companion flange (C).
