RL V6-3.7L (2009)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
-
Driver handle 07749-0010000
-
Base attachment, 70 mm 07LAF-SM40300
-
Base, 73 x 78/82.6 mm 07965-SD90100
-
Bearing driver attachment, 42 x 47 mm 07746-0010300
1. Remove the heat shield (A).
2. Remove the outer seal (A) and the external snap ring (B) from the intermediate shaft (C).
3. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using the 70 mm base attachment (C), the 73 x 78/82.6 mm base (D), and
a press. Be careful not to damage the metal rings (E) on the intermediate shaft during disassembly.
4. Remove the internal snap ring (A) from the bearing support (B).