RL V6-3.7L (2009)
Axle Shaft Assembly: Removal and Replacement
Intermediate Shaft Removal
Intermediate Shaft Removal
1. Drain the transmission fluid, then reinstall the drain plug with new sealing washer. See: Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement/ATF Replacement
2. Remove the right driveshaft. See: Front Driveshaft Removal
3. Remove the exhaust pipe bracket.
4. Remove the flange bolt (A) and the two dowel bolts (B).
5. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent
damaging the oil seal (B).
