RL V6-3.7L (2009)
Control Unit: Testing and Inspection
SH-AWD Yaw Rate-Lateral/Longitudinal Acceleration Neutral Position Memorization
SH-AWD Yaw Rate-Lateral/Longitudinal Acceleration Neutral Position Memorization
Whenever the yaw rate-lateral/longitudinal acceleration sensor is replaced, its neutral position be memorization must be done.
1. With the ignition switch to LOCK (0), connect the HDS to the 16P DLC (A) behind the driver's dashboard lower cover.
2. Turn the ignition switch to ON (II).
3. Make sure the HDS communicates with vehicle and the SH-AWD control unit. If it doesn't troubleshoot the DLC circuit. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics/DLC Circuit Troubleshooting
4. From the mode menu, select MISCELLANEOUS TEST, then select NEUTRAL MENU with the HDS and follow the screen prompts.
NOTE: See the HDS help menu for specific instructions.