RL V6-3474cc 3.5L (1998)
Lower Side Moulding / Trim: Service and Repair
Door and Side Moldings
Removal - '96 - 98 Models
CAUTION: When prying with a flat- tip screwdriver, wrap it with protective tape to prevent damage.
NOTE:
-
To remove the front side molding, remove the inner fender.
-
To remove the door molding, remove the door panel and plastic cover.
-
To remove the rear side molding, insert a flat-tip screwdriver between the body and molding, then detach the clip.
-
Take care not to bend the door moldings.
