RL V6-3474cc 3.5L (1998)
-
After spraying, allow the paint to settle for about 10 minutes, then force dry with an infrared lamp.
NOTE: Follow the paint manufacturer's instructions.
WARNING: Body parts being dried with an industrial dryer can get hot enough to cause injury. Do no touch parts being dried.
21. Polishing/buffing
-
Let the paint dry gradually, then polish the surface carefully using a polishing compound and sponge buffing pad.
-
To remove lint or dirt, wet sand the surface with #2000 paper or finer first, then polish with compound.
NOTE: Polish all roughness caused by sanding thoroughly. To do this, first polish with very fine compound, then with ultra fine compound.
-
After polishing, remove the masking paper and tape, and wash the entire vehicle thoroughly.
