RL V6-3474cc 3.5L (1998)
-
Avoid contact with skin. Wear an approved respirator, gloves, eye protection and appropriate clothing when painting.
-
Paint is flammable. Store in a safe place, and keep it away from sparks, flames or cigarettes.
1. To prepare the first coat (paint (C)) add a 1 part of paint (A) to 1 part of paint (B) and mix well.
2. Pour the mixture through a filter, then spray 2-3 light coats over the damaged surface.
NOTE: Spray the mixture until the intermediate coat 2 is thoroughly covered.
3. Prepare paint (D) for graduation by mixing 1 part of Paint (C) with 19 parts of the paint (B). Stir the mixture well.
4. Pour the mixture through a filter, then spray 2-3 light coats of the filtered mixture over paint Start at the center, then work toward the edge.
NOTE:
-
Check that the painted coat matches the color of the body paint while spraying.
-
Application of the mixture will determine the final color of the paint repair. Do not spray the mixture excessively as this may alter the final
color of the repair.
5. Apply 1-2 light coats of paint (B) over the repaired surface.
6. For the final top coat, add 15% thinner to a 4 : 1 mixture of the clear paint and hardener.
7. Spray 2-3 light final top coats over the damaged area.
