RL V6-3474cc 3.5L (1998)
NOTE: Take care not to bend the cable tubes and guide rails.
5. Installation is the reverse of the removal procedure.
NOTE:
-
Damaged parts should be replaced.
-
Grease the sliding portion with Super High Temp Urea Grease, P/N 08758 - 9002.
-
Fill the groove in each grommet with sealant.
-
Install the frame seal securely.
-
Before installing the motor, make sure both sliders are parallel.
-
Before installing the motor, install the frame and glass, then check the opening drag.
