RL V6-3474cc 3.5L (1998)
NOTE: Remove the wheelhouse upper panel carefully so they can be reused.
-
Center punch around the spot weld imprints on the front side frame and damper housing.
-
Drill holes in the center punched areas using a spot cutter.
-
Using a chisel, pry off the welded flange.
-2 Replace the damper housing with the front wheelhouse.
-
Remove the front pillar extension.
-
Remove the MIG weld flange with a disc sander.
WARNING: To prevent eye injury, wear goggles or safety glasses whenever sanding, cutting or grinding.
-
Using a chisel, pry off the welded flange form the front pillar and damper housing.
NOTE: Remove the front pillar extension carefully so they can be reused.
