RL V6-3474cc 3.5L (1998)
CAUTION: Be careful not damage the pin boot when pivoting the caliper down.
14. Install the brake hose bracket on the trailing arm.
NOTE: Inspect the brake hose for interference and twisting.
15. Press the brake pedal several times to make sure the brakes work, then test-drive.
NOTE: Engagement of the brake may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
16. After installation, check for leaks at hose and line joints or connections, and retighten if necessary.
