RL V6-3474cc 3.5L (1998)
Cruise Control Switch: Service and Repair
SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least 3 minutes.
NOTE: The PCM memory must be reset after reconnecting the battery.
3. Disconnect the airbag connectors.
Driver's Side:
-
Remove the access panel from the steering wheel, then disconnect the 2P connector between the driver's airbag and cable reel.
Frent Passenger's Side:
-
Remove the glove box.
-
Disconnect the front passenger's 2P connector from the SRS main harness.
4. Remove the dashboard lower cover.
