RL V6-3474cc 3.5L (1998)
13. Apply liquid gasket to the cylinder block, then install the oil pan.
NOTE: Do not apply liquid gasket to the O-ring grooves.
Oil Pan Torque Sequence
14. Tighten the oil pan bolts as shown.
8 x 1.25 mm: 22 Nm (2.2 kgs.cm, 16 ft. lbs.)
15. Apply engine oil to the balancer shaft, then insert the balancer shaft.
NOTE: Take care not to damage the journals when installing the balancer shaft.
16. Install the balancer shaft holder.
NOTE: Apply liquid gasket around the oil hole to the block mating surface.
17. Install the rear balancer weight.
