RL V6-3474cc 3.5L (1998)
Balance Shaft: Service and Repair
Assembly
CRANKSHAFT AND BALANCER SHAFT INSTALLATION
OIL: Before installing the crankshaft, apply a coat of 15 engine oil to the main bearings and rod bearings.
1. Insert the bearing halves in the cylinder block and connecting rods.
2. Lower the crankshaft into the block.
3. Install the thrust washers on the No. 3 journal. Oil the thrust washer surfaces.
4. Install the bearings and caps. Tighten the cap bolts only enough to seat the bearing caps.
