RL V6-3474cc 3.5L (1998)
14. Loosen the balancer belt adjusting bolt 180°. Push the tensioner to remove tension from the balancer belt, then retighten the adjusting bolt.
15. Remove the balancer belt.
16. Loosen the timing belt adjusting bolt 180°. Push the tensioner to remove tension from the timing belt, then retighten the adjusting bolt.
17. Remove the timing belt.
Installation
Install the timing belt and balancer belt in the reverse order of removal; only key points are described here.
CAUTION: Do not rotate the crankshaft pulley or camshaft pulleys with the timing belt removed. The pistons may hit the valves and cause damage.
NOTE: When installing only the balancer belt, go to step 12.
1. Remove the spark plugs.
2. Remove the balancer belt drive pulley and timing belt guide plate.
