RL V6-3474cc 3.5L (1998)
22. Check that the crankshaft pulley and camshaft pulleys are at TDC.
23. If the camshaft and crankshaft pulleys are not positioned at TDC, remove the timing belt and adjust the positioning following the procedure, then
reinstall the timing belt.
24. After installation, adjust the tension of each belt.
-
See Starting and Charging for alternator belt tension adjustment.
-
See Heating and Air Conditioning for A/C compressor belt tension adjustment.
-
See Steering and Suspension for P/S pump belt tension adjustment.
