RL V6-3474cc 3.5L (1998)
11. Remove the bolt and the cruise control unit. Disconnect the connectors from the mode control motor and the air mix control motor, then remove
the clips and the A/C wire harness. Remove the mounting bolt, the mounting nuts and the heater unit.
12. Install in the reverse order of removal. Make note of the following items.
-
Apply sealant to the grommets.
-
Do not interchange the inlet and outlet heater hoses.
-
Make sure that the clamps are secure.
-
Refill the cooling system with engine coolant.
-
Connect the heater valve cable, and make sure that it is properly adjusted.
-
Make sure that there is no air leakage.
-
The PCM memory must be reset after reconnecting the battery.
-
Enter the anti-theft code for the radio, then enter the customer's radio station presets.