RL V6-3474cc 3.5L (1998)
Solar Sensor: Testing and Inspection
Component Test
Turn the ignition switch ON (II). Measure the voltage between the terminals with the (+) probe on the No.2 terminal and the (-) probe on the No.1
terminal with the 2P connector connected. Voltage should be;
-
3.5 to 3.9 V or more with the sensor out of direct sunlight.
-
3.8 to 3.4 V or less with the sensor in direct sunlight.
NOTE: The voltage will not change under the light of a flashlight or a fluorescent lamp.
