RL V6-3474cc 3.5L (1998)
6. Go to step 7 for except '00 Canada model, and go to step 8 for '00 Canada model.
7. Check for continuity between the cable reel 4P connector No.3 terminal and 20P connector No.20 terminal ('96 - 98 models) or 4P connector No.2
terminal and 20P connector No.17 terminal ('99 model and '00 USA model) of the combination switch harness.
-
If there is continuity, go to step 9.
-
If there is no continuity, check for an open in the wire of the combination switch harness.
8. Check for continuity between the cable reel 4P connector No.2 terminal and combination switch harness 22P connector No.19 terminal.
-
If there is continuity, go to step 9.
-
If there is no continuity, check for an open in the wire of the combination switch harness.
9. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
10. Turn the ignition switch OFF.
11. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least three minutes.
12. Remove the driver's airbag.
