RL V6-3474cc 3.5L (1998)
Drive Belt: Adjustments
Alternator Belt
Alternator Belt Inspection and Adjustment
NOTE: When using a new belt, first adjust the deflection or tension to the values for the new belt, then readjust the deflection or tension to the values
for the used belt after running engine for 5 minutes.
Deflection method:
Apply a force of 98 N (10 kgf, 22 lbf), and measure the deflection between the alternator and crankshaft pulley.
Deflection:
Used Belt: 9.5 - 11.5 mm (0.37 - 0.45 in)
New Belt: 7.0 - 8.0 mm (0.26 - 0.31 in)
NOTE: If the belt is worn or damaged, replace it.
Belt tension gauge method:
Attach the belt tension gauge to the belt and measure the tension. Follow the gauge manufacturer's instructions.
Tension:
Used Belt: 390 - 590 N (40 - 60 kgf,88 - 130 lbf)