RL V6-3474cc 3.5L (1998)
9. Install the new SRS unit.
10. Connect the SRS main harness 18P connector to the SRS unit, then push it into position until it clicks.
11. Reconnect the driver's airbag 2P connector to the cable reel 2P connector, and reinstall the access panel on the steering wheel.
12. Reconnect the front passenger's airbag 2P connector to the SRS main harness 2P connector, then install the glove box.
13. Reconnect the left side wire harness 2P connector to the driver's seat belt tensioner and the right side wire harness 2P connector to the front
passenger's seat belt tensioner. Reinstall the B-pillar trim panels.
14. Reconnect the battery positive cable, then the negative cable.
15. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator light should come on for about
six seconds and then go off.
16. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
