RL V6-3474cc 3.5L (1998)
16. Install the steering wheel, then connect the radio remote switch connector, horn connector and cruise control set/resume/cancel switch connector.
17. Install the steering wheel nut, then install the driver's airbag.
18. Install the dashboard lower cover, and reinstall the access panel on the steering wheel.
19. Reconnect the battery positive cable, then the negative cable.
20. After installing the cable reel, confirm proper system operation:
-
Turn the ignition switch ON (II); the SRS indicator light should come on for about six seconds and then go off.
-
Make sure horn button works.
-
Make sure the headlight and wiper switches work.
-
Go for a test drive, and make sure the cruise control switches work.
21. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
