RL V6-3474cc 3.5L (1998)
Horn Switch: Testing and Inspection
1. Remove the dashboard lower cover and knee bolster.
2. Disconnect the combination switch harness 20P [22P] connector from the main wire harness.
3. Check for continuity between the combination switch harness 20P or 22P ('00 Canada model) terminal and body ground in each horn switch
position.
-
If there is continuity, the horn switch is OK.
-
If there is no continuity, go to step 4
4. Remove the steering column upper and lower covers.
5. Disconnect the 4P connector from the cable reel.
