RL V6-3474cc 3.5L (1998)
Transmission Position Switch/Sensor: Service and Repair
Replacement
Replacement
WARNING: Make sure lift, jacks and safety stands are placed properly.
1. Raise the front of the vehicle, and support it with safety stands.
2. Set the parking brake, and block both rear wheels securely.
3. Shift the transmission to the N position.
4. Remove the clamp, then disconnect the transmission range switch connector.
5. Remove the clamp from the transmission range switch harness bracket on the real cover.
6. Remove the shift cable cover mounting bolts.
7. Remove the shift solenoid valve/A/T clutch pressure control solenoid valve harness clamp and connector from the shift cable cover.
8. Disconnect the shift solenoid valve/A/T clutch pressure control solenoid valve harness connector, then remove the shift cable cover from the
transmission.
9. Remove the control lever.
10. Remove the locknut and lock washer.
11. Remove the transmission range switch.
12. Set a new transmission range switch to the N position as shown.
