RL V6-3474cc 3.5L (1998)
11. Coat the O-ring with power steering fluid, and position it into the pump housing.
12. Install the pump cover assembly in the pump housing.
13. Coat the flow control valve with power steering fluid.
14. Install the flow control valve and spring on the pump housing.
15. Coat the O-ring with power steering fluid, and install it on the flow control valve cap.
16. Install the flow control valve cap on the pump housing, and tighten it.
17. Coat the O-ring with power steering fluid, and install it into the grooves in the inlet joint.
18. Install the inlet joint on the pump housing.
