RL V6-3474cc 3.5L (1998)
2. Remove the damper from the spring compressor, then disassemble the damper.
INSPECTION
1. Reassemble all parts, except the spring.
2. Push on the damper as shown.
3. Check for smooth operation through a full stroke, both compression and extension.
NOTE: The damper should move smoothly. If it does not (no compression or no extension), the gas is leaking and the damper should be replaced.
4. Check for oil leaks, abnormal noises or binding during these tests.
REASSEMBLY
1. Install the damper unit on a spring compressor.
NOTE: Follow the manufacturer's instructions.
2. Assemble the damper in reverse order of disassembly except the damper mounting washer and self-locking nut.
NOTE: Align the bottom of damper spring and spring lower seat as shown.
3. Position the damper mounting base on the damper unit as shown.
4. Compress the damper spring with the spring compressor.
5. Install the damper mounting washer, then loosely install a new self-locking nut.
