RL V6-3474cc 3.5L (1998)
6. Hold the damper shaft, and tighten the self-locking nut.
INSTALLATION
1. Lower the rear suspension and set the damper assembly in its original position.
2. Loosely install the damper mounting bolt.
3. Raise the rear suspension with a floor jack until the weight of the vehicle is on the damper.
NOTE:
-
The damper mounting bolts should be tightened with the damper under vehicle load.
-
Do not interchange the right and left dampers.
CAUTION: Install the damper assembly on the damper bracket with care not to allow the speed sensor wire to get caught between the damper
and the bracket.
4. Install and tighten the damper mounting nuts.
5. Tighten the damper mounting bolt.
6. Install the damper cap and rear speaker.
