RL V6-3474cc 3.5L (1998)
3. Remove the hub cap, then pry the spindle nut lock tab away from the spindle and loosen the nut.
4. Remove the brake hose mounting bolt.
CAUTION: To prevent accidental damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper assembly from the
undercarriage.
5. Remove the caliper bracket mounting bolts and hang the caliper assembly to one side.
6. Remove the 6 mm brake disc retaining screws.
7. Screw two 8 x 12 mm bolts into the disc to push it away from the hub. Remove the brake disc.
