RL V6-3474cc 3.5L (1998)
Torque Converter Clutch Solenoid: Service and Repair
Replacement
NOTE: Torque converter clutch (lock-up control) solenoid valves A and B must be replaced as an assembly.
1. Remove the mounting bolts and torque converter clutch solenoid valves A and B.
2. Clean the mounting surface and fluid passages of the torque converter clutch solenoid valves A and B, and install a new torque converter clutch
solenoid valves A and B with a new filter/gasket.
NOTE: Install the filter/gasket in the direction shown.
3. Check connector for rust, dirt or oil, then reconnect the connector securely.
