RL V6-3474cc 3.5L (1998)
NOTE: Be careful not to touch the rear window where adhesive will be applied.
6. Install the fasteners to the body as shown.
7. Set the rear window, then center it in the opening. Make alignment marks across the rear window and body with a grease pencil at the four points
shown.
NOTE: Be careful not to touch the rear window where adhesive will be applied.
8. Remove the rear window.
9. With a sponge, apply a light coat of glass primer around the edge of the rear window as shown, then lightly wipe it off with gauze or cheesecloth.
