RL V6-3474cc 3.5L (1998)
16. Let the adhesive dry for at least 1 hour, then spray water over the rear window and check for leaks. Mark the leaking areas, let the rear window
dry, then seal with sealant.
NOTE: Let the vehicle stand for at least 4 hours after rear window installation. If the vehicle has to be used within the first 4 hours, it must be
driven slowly.
17. Reinstall all remaining removed parts.
NOTE: Advise the customer not to do the following things for 2 to 3 days.
-
Slam the doors with all the windows rolled up.
-
Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough, uneven roads).
