RL V6-3474cc 3.5L (1998)
Windshield Washer Reservoir: Service and Repair
Washer Reservoir
Removal
CAUTION: Put on gloves to protect your hands.
'96 - 99 models:
1. Remove the bolt, then pull out the washer filler.
2. Pull away the inner fender as necessary.
3. Disconnect the washer tube and windshield washer motor connector.
4. Remove the bolt, then remove the washer reservoir by sliding it forward.
5. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure the windshield washer motor connector and washer tube is connected properly.
-
Check the windshield washer motor operation.
