RL V6-3474cc 3.5L (1998)
Wiper Motor: Testing and Inspection
Windshield Wiper Motor Test
1. Open the hood, and remove the cap nuts and the wiper arms.
NOTE: Carefully remove the wiper arms, so that they do not touch the hood.
2. Remove the cowl cover by prying out the trim clips.
3. Disconnect the 5P connector from the windshield wiper motor.
4. Test the motor by connecting battery power and ground according to the table.
If the motor does not run or fails to run smoothly, replace it.
5. Connect an analog voltmeter between the No.5 (+) and No.3 (-) terminals, and run the motor at low or high speed.
The voltmeter should indicate 0 V and 4 V or less alternately.
